Best Truck Bed Cargo Slides
Compare reach, deck width and load ratings before committing to a sliding platform that changes how your pickup carries gear.
Compare Current OptionsA bed slide solves a reach problem, not a storage-volume problem: the platform brings cargo toward the tailgate, but it consumes height and adds weight. The most useful buying question is how far your heaviest regularly used item needs to travel before you can safely lift it.
As an Amazon Associate, we earn from qualifying purchases.
01 Quick picks by the job they solve
These are specification-based recommendations, not hands-on test winners. Ratings describe the manufacturer’s platform capacity, never a substitute for the truck’s payload limit.
Half-width options preserve adjacent bed floor for awkward cargo.
A straightforward three-quarter-extension platform for mixed household and jobsite cargo.
A higher-capacity step for frequent work use where a 1,000 lb platform is not enough.
A configurable option when deck reach matters as much as capacity.
The high-capacity BEDSLIDE option for dense equipment when the truck has enough remaining payload.
02 Compare capacity, travel and compromises
Ratings below are manufacturer-advertised series limits; the correct vehicle-specific part, loading distribution and extension option must still be confirmed.
| Cargo slide | Advertised capacity | Extension | Best reason to choose | Main limitation |
|---|---|---|---|---|
| DECKED CargoGlide 600 | 600 lb | 75% | Best for a half-width gear lane | Not suitable for loads above its rated capacity or buyers needing full extension. |
| BEDSLIDE 1000 Classic | 1,000 lb evenly distributed | 75% | Best for everyday full-deck access | Three-quarter extension leaves part of the deck inside the bed; deck height reduces vertical clearance. |
| BEDSLIDE 1500 Contractor | 1,500 lb rated series | Verify standard vs Max | Best for heavier trade equipment | Added hardware and cargo mass can reduce remaining truck payload; verify extension variant. |
| DECKED CargoGlide 1500 | 1,500 lb series | Depends on configuration | Best for configurable extension | A 100% extension model cannot be installed atop a DECKED Drawer System according to DECKED. |
| BEDSLIDE 2000 Heavy Duty | 2,000 lb rated series | Verify standard vs Max | Best for demanding commercial loads | Overkill for light gear; heavy platform and load require extra attention to mounting and payload. |
03 Detailed recommendations with real tradeoffs
Capacity is only one axis. A shorter deck can preserve space, while full extension may matter under a topper. Read the manufacturer’s exact configuration before ordering.
DECKED CargoGlide 600
Half-width options preserve adjacent bed floor for awkward cargo.
What stands out: Manufacturer lists a 600 lb rating, 75% extension, four D-ring tie-downs and full-/half-width variants.
Who it suits: Weekend camping kits, cooler boxes and tools that fit within a narrower deck.
Ownership tradeoff: DECKED notes vehicle-specific installation and special requirements for mounting over compatible DECKED drawers.
Check PriceBEDSLIDE 1000 Classic
A straightforward three-quarter-extension platform for mixed household and jobsite cargo.
What stands out: BEDSLIDE lists WEATHERDECK composite decking, BEDTRAX T-slots, D-ring tie-downs and multiple locking positions.
Who it suits: Owners who routinely retrieve heavy totes, cases or tools from beneath a cap.
Ownership tradeoff: The published 1,000 lb limit assumes evenly distributed weight; select the exact fitment part.
Check PriceBEDSLIDE 1500 Contractor
A higher-capacity step for frequent work use where a 1,000 lb platform is not enough.
What stands out: BEDSLIDE identifies a 1,500 lb Contractor series and a separate 1,500 Max Extension version.
Who it suits: Tradespeople loading compressors, tool cases and bulky materials within the truck’s limits.
Ownership tradeoff: Do not assume a 1,500 lb slide rating increases the truck’s legal or manufacturer payload.
Check PriceDECKED CargoGlide 1500
A configurable option when deck reach matters as much as capacity.
What stands out: DECKED offers CargoGlide in vehicle-specific lengths, with extension and capacity choices; its product page explains drawer-system limits.
Who it suits: Owners comparing standard bed mounting against a compatible drawer system.
Ownership tradeoff: Confirm the exact 1500 SKU, extension, width and mounting method; do not transfer specs across configurations.
Check PriceBEDSLIDE 2000 Heavy Duty
The high-capacity BEDSLIDE option for dense equipment when the truck has enough remaining payload.
What stands out: BEDSLIDE lists 2,000 Heavy Duty and 2,000 Max Extension as distinct models.
Who it suits: Commercial users with documented loads and a truck rated to carry the complete installed system.
Compare adjacent solutions
A cargo slide improves reach but changes loading height, usable bed length and how gear is secured.
- Truck bed organizers — dividers, bins and modular storage.
- Truck bed tool boxes — crossbed, chest and side-mount storage.
- Truck bed racks — elevated cargo platforms and load limits.
- Truck bed protection and storage guide library — browse all 14 related guides.
Ownership tradeoff: Do not confuse slide capacity with the truck’s payload, axle ratings, or safe loading while extended.
Check Price04 The cargo-slide fitment worksheet
Write down these seven measurements and constraints before comparing product listings:
- Truck identification: year, make, model, bed length and special bed features, including composite beds, factory rails or in-bed hitches.
- Usable bed footprint: length from bulkhead to closed tailgate, narrowest width between wheel wells, and clearance around tie-downs.
- Vertical stack: floor-to-tonneau or topper clearance minus the slide’s installed height and the tallest cargo item.
- Required reach: mark where the item sits when the slide is fully extended; 75% extension does not mean every inch of the deck exits the bed.
- Payload calculation: subtract the weight of passengers, other cargo and installed accessories from the truck’s available payload before allocating slide-plus-load weight. Check axle ratings as well.
- Loading and tie-down plan: check cargo weight distribution, restraint points, and manufacturer rules for moving or loading the deck while extended.
- Installation interface: confirm drilling, mounting hardware, bed-liner compatibility, tailgate clearance and whether any existing drawer system is approved for the chosen slide.
Practical decision: a slide that cannot open far enough under your cap—or that leaves too little vertical clearance—is the wrong slide even when its rated capacity looks ideal.
05 Three-quarter vs full extension
75% extension is a reasonable starting point when you mostly need to bring totes and tools to the tailgate. It leaves part of the platform inside the bed and can suit a simpler everyday setup.
100% extension can make sense beneath a cap, with long beds, or when you need access to items at the front edge. It can also change the permitted mounting configuration: DECKED specifically excludes 100% extension CargoGlide models from mounting on its Drawer System.
Half-width vs full-width: a half-width slide can leave a second cargo lane free, but it narrows the deck and changes how gear must be restrained. A full-width platform makes more of the bed accessible together, at the cost of occupying the floor.
06 Frequently asked questions
Can a 1,500 lb slide carry 1,500 lb in any pickup?
No. The truck’s remaining payload, axle ratings, mounting requirements and the manufacturer’s load-distribution rules all apply. A slide rating does not increase vehicle capacity.
Do truck bed slides work under tonneau covers?
Some do, but you must subtract the installed slide height and cargo height from the available cover clearance. Cover hardware can also affect mounting.
Is full extension always better?
No. It can improve access under a topper, but it may cost more, affect mounting choices and be unnecessary if you can reach your gear with 75% travel.
Can CargoGlide mount over DECKED drawers?
Only specified models and sizes with the required mounting arrangement. DECKED says 100% extension and higher-payload CargoGlide variants cannot mount on its Drawer System.
Will a cargo slide fit a truck with a fifth-wheel hitch?
Do not assume so. DECKED states CargoGlide is incompatible with beds containing protruding fifth-wheel or gooseneck equipment. Check the chosen maker’s exclusions.
Bottom line
Start with the cargo you move most often, then choose the smallest adequate rated platform and the extension that makes that cargo reachable. The best truck bed cargo slide is the one that fits the bed, preserves enough payload and opens safely in your actual setup.